LumbusLIVE
Get started

First units shipping to founding creators.

The entry encoder

Lumbus Niña

Four mobile modems built in. No separate modem kit required.

The one to start with. Clip it on, plug in an HDMI or USB camera, and stream in 1080p60 with four modems already inside — the whole rig in 580 g.

$1,530one-time purchase

Taxes, duties and shipping are shown separately. No subscription is required to use it.

Build a setup with Niña

Over one connection, Niña streams straight to your destination and Lumbus Connect is not used. Combine up to 8 connections at once and Lumbus Connect joins them into one stream at your destination.

Specifications

Video
Up to 1080p60 · 8-bit 4:2:0
Video formats
1080p and 720p at 60, 59.94, 50, 30, 29.97 and 25 · 1080i at 60, 59.94 and 50 · PAL and NTSC
Inputs
HDMI 1.4 · USB-A · USB-C
Outputs
HDMI 1.4 loop output for monitoring
Works with
Any HDMI camera, and USB (UVC) cameras — action cameras, mirrorless cameras with USB video, PTZ cameras with UVC control. Compatible with the DJI Action 5 Pro, DJI Pocket 3, Sony ZV-1 II, A6700 and A7C, and Canon mirrorless cameras, among others. Cameras are not included.
Connections
Up to 8 at once — four internal modems, two USB modems, Wi-Fi, Ethernet
Mobile modems
Four internal mobile modems (1 × 5G, 3 × 4G)
Protocols
RTMP, RTMPS, SRT, HLS, UDP-TS and RTSP
Encoding
H.264 and H.265 · CBR or VBR
Max bitrate
Up to 15 Mbps
Audio
AAC-LC and AAC-HE · 44.1 or 48 kHz
Local recording
64 GB card fitted · replaceable and hot-swappable · cards up to 1 TB, subject to card compatibility · live-only or record-and-live
Display
LCD status display
Battery and power
About 4 hours internal (50 Wh) · USB-C power in · 16 W maximum
Weight
580 g
Dimensions
175 × 95 × 32 mm
Operating range
−15 °C to 45 °C
Also on board
Vertical streaming · can power selected USB-C cameras · Wi-Fi hotspot while Wi-Fi is also used as a connection · Lumbus belt pack included

What comes with it

  • Lumbus Niña encoder
  • Lumbus belt pack
  • 64 GB recording card, fitted
  • Standard power accessories
  • Initial configuration
  • Lumbus dashboard access
  • Standard Lumbus support
  • 100 GB Lumbus Connect bonding allowance, valid three months
  • Your Lumbus Connect sign-in, set up on the encoder
  • Hardware warranty on the terms set out in the Lumbus Live Terms
About the included bonding allowance

Every Niña and Pinta includes a 100 GB starter bonding allowance for Lumbus Connect, valid for three months — enough to set up, test and run your first bonded streams. Lumbus Connect is used when combining two or more connections. The SIM allowance is sold separately.

Lumbus Connect combines two or more connections into one reliable stream.

Your Lumbus Connect bonding allowance comes with its own sign-in — set up on your Lumbus encoder, or sent to you if you use your own hardware. Your balance lives there; the Lumbus app and dashboard do not show it. Packs are bought from Plan & add-ons on the web.

If a pack runs out mid-stream you get a 20 GB bonding allowance free, so you can finish and buy your next pack — nothing is cut off.

When you need Lumbus Connect

Build your setup around Niña.

Add SIMs, Lumbus Connect or Studio only if you need them. One-time and monthly charges are kept apart, and nothing is billed until you confirm.

Build your setup Compare products