First units shipping to founding creators.
Lumbus Pinta
Professional SDI and HDMI streaming with four mobile modems already built in.
The one for SDI cameras and bigger networks: 1080p60 over SDI or HDMI, four modems inside, room for four more USB modems, a touchscreen, and an external battery when the day runs long.
Taxes, duties and shipping are shown separately. No subscription is required to use it.
Build a setup with PintaOver one connection, Pinta streams straight to your destination and Lumbus Connect is not used. Combine up to 10 connections at once and Lumbus Connect joins them into one stream at your destination.
Specifications
- Video
- Up to 1080p60 · 8-bit 4:2:0
- Video formats
- 1080p at 60, 50, 30, 25 and 24 · 1080i at 60 and 50 · 720p at 60, 50, 30 and 25 · PAL and NTSC
- Inputs
- 3G-SDI · HDMI 1.4
- Outputs
- HDMI 1.4 loop output for monitoring
- Works with
- Any 3G-SDI or HDMI camera. Cameras are not included.
- Connections
- Up to 10 at once — four internal modems, four USB modems, Wi-Fi, Ethernet
- Mobile modems
- Four internal mobile modems (1 × 5G, 3 × 4G)
- Protocols
- RTMP, RTMPS, SRT, HLS, UDP-TS and RTSP
- Encoding
- H.264 and H.265 · CBR or VBR
- Max bitrate
- Up to 15 Mbps
- Audio
- Embedded over SDI or HDMI · up to four channels · 48 kHz, 16-bit · AAC
- Local recording
- 64 GB SD card fitted · record-and-live · recording time varies with quality settings
- Display
- 3-inch touchscreen · one-touch go-live · web-based management
- Battery and power
- About 2 hours internal · external battery supported · 9–17 V DC in · under 16 W
- Dimensions
- 105 × 168 × 44 mm
- Operating range
- −20 °C to 50 °C
- Also on board
- Lumbus belt pack included
What comes with it
- Lumbus Pinta encoder
- Lumbus belt pack
- 64 GB recording card, fitted
- Standard power accessories
- Initial configuration
- Lumbus dashboard access
- Standard Lumbus support
- 100 GB Lumbus Connect bonding allowance, valid three months
- Your Lumbus Connect sign-in, set up on the encoder
- Hardware warranty on the terms set out in the Lumbus Live Terms
Every Niña and Pinta includes a 100 GB starter bonding allowance for Lumbus Connect, valid for three months — enough to set up, test and run your first bonded streams. Lumbus Connect is used when combining two or more connections. The SIM allowance is sold separately.
Lumbus Connect combines two or more connections into one reliable stream.
Your Lumbus Connect bonding allowance comes with its own sign-in — set up on your Lumbus encoder, or sent to you if you use your own hardware. Your balance lives there; the Lumbus app and dashboard do not show it. Packs are bought from Plan & add-ons on the web.
If a pack runs out mid-stream you get a 20 GB bonding allowance free, so you can finish and buy your next pack — nothing is cut off.
When you need Lumbus ConnectBuild your setup around Pinta.
Add SIMs, Lumbus Connect or Studio only if you need them. One-time and monthly charges are kept apart, and nothing is billed until you confirm.